Updating .spacemacs for the new release.

.gitmodules

@@ -1,3 +0,0 @@
-[submodule "tmux/plugins/tpm"]
-	path = tmux/plugins/tpm
-	url = https://github.com/tmux-plugins/tpm

spacemacs

@@ -11,13 +11,27 @@ values."
    ;; `+distribution'. For now available distributions are `spacemacs-base'
    ;; or `spacemacs'. (default 'spacemacs)
    dotspacemacs-distribution 'spacemacs
+   ;; Lazy installation of layers (i.e. layers are installed only when a file
+   ;; with a supported type is opened). Possible values are `all', `unused'
+   ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
+   ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
+   ;; lazy install any layer that support lazy installation even the layers
+   ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
+   ;; installation feature and you have to explicitly list a layer in the
+   ;; variable `dotspacemacs-configuration-layers' to install it.
+   ;; (default 'unused)
+   dotspacemacs-enable-lazy-installation 'unused
+   ;; If non-nil then Spacemacs will ask for confirmation before installing
+   ;; a layer lazily. (default t)
+   dotspacemacs-ask-for-lazy-installation t
+   ;; If non-nil layers with lazy install support are lazy installed.
    ;; List of additional paths where to look for configuration layers.
    ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
    dotspacemacs-configuration-layer-path '()
-   ;; List of configuration layers to load. If it is the symbol `all' instead
+   ;; List of configuration layers to load.
-   ;; of a list then all discovered layers will be installed.
    dotspacemacs-configuration-layers
-   '(version-control
+   '(ivy
+     version-control
      git
      github
      perforce
@@ -111,13 +125,21 @@ values."
    ;; Maximum allowed time in seconds to contact an ELPA repository.
    dotspacemacs-elpa-timeout 5
    ;; If non nil then spacemacs will check for updates at startup
-   ;; when the current branch is not `develop'. (default t)
+   ;; when the current branch is not `develop'. Note that checking for
-   dotspacemacs-check-for-update t
+   ;; new versions works via git commands, thus it calls GitHub services
-   ;; One of `vim', `emacs' or `hybrid'. Evil is always enabled but if the
+   ;; whenever you start Emacs. (default nil)
-   ;; variable is `emacs' then the `holy-mode' is enabled at startup. `hybrid'
+   dotspacemacs-check-for-update nil
-   ;; uses emacs key bindings for vim's insert mode, but otherwise leaves evil
+   ;; If non-nil, a form that evaluates to a package directory. For example, to
-   ;; unchanged. (default 'vim)
+   ;; use different package directories for different Emacs versions, set this
-   dotspacemacs-editing-style 'hybrid
+   ;; to `emacs-version'.
+   dotspacemacs-elpa-subdirectory nil
+   ;; One of `vim', `emacs' or `hybrid'.
+   ;; `hybrid' is like `vim' except that `insert state' is replaced by the
+   ;; `hybrid state' with `emacs' key bindings. The value can also be a list
+   ;; with `:variables' keyword (similar to layers). Check the editing styles
+   ;; section of the documentation for details on available variables.
+   ;; (default 'vim)
+   dotspacemacs-editing-style 'vim
    ;; If non nil output loading progress in `*Messages*' buffer. (default nil)
    dotspacemacs-verbose-loading nil
    ;; Specify the startup banner. Default value is `official', it displays
@@ -127,13 +149,16 @@ values."
    ;; by your Emacs build.
    ;; If the value is nil then no banner is displayed. (default 'official)
    dotspacemacs-startup-banner 'official
-   ;; List of items to show in the startup buffer. If nil it is disabled.
+   ;; List of items to show in startup buffer or an association list of
-   ;; Possible values are: `recents' `bookmarks' `projects'.
+   ;; the form `(list-type . list-size)`. If nil then it is disabled.
-   ;; (default '(recents projects))
+   ;; Possible values for list-type are:
-   dotspacemacs-startup-lists '(recents bookmarks projects)
+   ;; `recents' `bookmarks' `projects' `agenda' `todos'."
-   ;; Number of recent files to show in the startup buffer. Ignored if
+   ;; List sizes may be nil, in which case
-   ;; `dotspacemacs-startup-lists' doesn't include `recents'. (default 5)
+   ;; `spacemacs-buffer-startup-lists-length' takes effect.
-   dotspacemacs-startup-recent-list-size 5
+   dotspacemacs-startup-lists '((recents . 5)
+                                (projects . 7))
+   ;; True if the home buffer should respond to resize events.
+   dotspacemacs-startup-buffer-responsive t
    ;; Default major mode of the scratch buffer (default `text-mode')
    dotspacemacs-scratch-mode 'emacs-lisp-mode
    ;; List of themes, the first of the list is loaded when spacemacs starts.
@@ -162,6 +187,9 @@ values."
    ;; Major mode leader key accessible in `emacs state' and `insert state'.
    ;; (default "C-M-m)
    dotspacemacs-major-mode-emacs-leader-key "C-M-m"
+   ;; The key used for Emacs commands (M-x) (after pressing on the leader key).
+   ;; (default "SPC")
+   dotspacemacs-emacs-command-key "SPC"
    ;; These variables control whether separate commands are bound in the GUI to
    ;; the key pairs C-i, TAB and C-m, RET.
    ;; Setting it to a non-nil value, allows for separate commands under <C-i>
@@ -169,14 +197,17 @@ values."
    ;; In the terminal, these pairs are generally indistinguishable, so this only
    ;; works in the GUI. (default nil)
    dotspacemacs-distinguish-gui-tab nil
-   ;; (Not implemented) dotspacemacs-distinguish-gui-ret nil
+   ;; If non nil `Y' is remapped to `y$' in Evil states. (default nil)
-   ;; The command key used for Evil commands (ex-commands) and
+   dotspacemacs-remap-Y-to-y$ nil
-   ;; Emacs commands (M-x).
+   ;; If non-nil, the shift mappings `<' and `>' retain visual state if used
-   ;; By default the command key is `:' so ex-commands are executed like in Vim
+   ;; there. (default t)
-   ;; with `:' and Emacs commands are executed with `<leader> :'.
+   dotspacemacs-retain-visual-state-on-shift t
-   dotspacemacs-command-key ":"
+   ;; If non-nil, J and K move lines up and down when in visual mode.
-   ;; If non nil `Y' is remapped to `y$'. (default t)
+   ;; (default nil)
-   dotspacemacs-remap-Y-to-y$ t
+   dotspacemacs-visual-line-move-text nil
+   ;; If non nil, inverse the meaning of `g' in `:substitute' Evil ex-command.
+   ;; (default nil)
+   dotspacemacs-ex-substitute-global nil
    ;; Name of the default layout (default "Default")
    dotspacemacs-default-layout-name "Default"
    ;; If non nil the default layout name is displayed in the mode-line.
@@ -185,6 +216,10 @@ values."
    ;; If non nil then the last auto saved layouts are resume automatically upon
    ;; start. (default nil)
    dotspacemacs-auto-resume-layouts nil
+   ;; Size (in MB) above which spacemacs will prompt to open the large file
+   ;; literally to avoid performance issues. Opening a file literally means that
+   ;; no major mode or minor modes are active. (default is 1)
+   dotspacemacs-large-file-size 1
    ;; Location where to auto-save files. Possible values are `original' to
    ;; auto-save the file in-place, `cache' to auto-save the file to another
    ;; file stored in the cache directory and `nil' to disable auto-saving.
@@ -192,10 +227,6 @@ values."
    dotspacemacs-auto-save-file-location 'cache
    ;; Maximum number of rollback slots to keep in the cache. (default 5)
    dotspacemacs-max-rollback-slots 5
-   ;; If non nil then `ido' replaces `helm' for some commands. For now only
-   ;; `find-files' (SPC f f), `find-spacemacs-file' (SPC f e s), and
-   ;; `find-contrib-file' (SPC f e c) are replaced. (default nil)
-   dotspacemacs-use-ido nil
    ;; If non nil, `helm' will try to minimize the space it uses. (default nil)
    dotspacemacs-helm-resize nil
    ;; if non nil, the helm header is hidden when there is only one source.
@@ -204,9 +235,14 @@ values."
    ;; define the position to display `helm', options are `bottom', `top',
    ;; `left', or `right'. (default 'bottom)
    dotspacemacs-helm-position 'bottom
+   ;; Controls fuzzy matching in helm. If set to `always', force fuzzy matching
+   ;; in all non-asynchronous sources. If set to `source', preserve individual
+   ;; source settings. Else, disable fuzzy matching in all sources.
+   ;; (default 'always)
+   dotspacemacs-helm-use-fuzzy 'always
    ;; If non nil the paste micro-state is enabled. When enabled pressing `p`
    ;; several times cycle between the kill ring content. (default nil)
-   dotspacemacs-enable-paste-micro-state nil
+   dotspacemacs-enable-paste-transient-state nil
    ;; Which-key delay in seconds. The which-key buffer is the popup listing
    ;; the commands bound to the current keystroke sequence. (default 0.4)
    dotspacemacs-which-key-delay 0.4
@@ -237,24 +273,35 @@ values."
    ;; the transparency level of a frame when it's inactive or deselected.
    ;; Transparency can be toggled through `toggle-transparency'. (default 90)
    dotspacemacs-inactive-transparency 90
+   ;; If non nil show the titles of transient states. (default t)
+   dotspacemacs-show-transient-state-title t
+   ;; If non nil show the color guide hint for transient state keys. (default t)
+   dotspacemacs-show-transient-state-color-guide t
    ;; If non nil unicode symbols are displayed in the mode line. (default t)
    dotspacemacs-mode-line-unicode-symbols t
    ;; If non nil smooth scrolling (native-scrolling) is enabled. Smooth
-   ;; scrolling overrides the default behavior of Emacs which recenters the
+   ;; scrolling overrides the default behavior of Emacs which recenters point
-   ;; point when it reaches the top or bottom of the screen. (default t)
+   ;; when it reaches the top or bottom of the screen. (default t)
    dotspacemacs-smooth-scrolling t
    ;; If non nil line numbers are turned on in all `prog-mode' and `text-mode'
    ;; derivatives. If set to `relative', also turns on relative line numbers.
    ;; (default nil)
    dotspacemacs-line-numbers nil
+   ;; Code folding method. Possible values are `evil' and `origami'.
+   ;; (default 'evil)
+   dotspacemacs-folding-method 'evil
    ;; If non-nil smartparens-strict-mode will be enabled in programming modes.
    ;; (default nil)
    dotspacemacs-smartparens-strict-mode nil
+   ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
+   ;; over any automatically added closing parenthesis, bracket, quote, etc…
+   ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
+   dotspacemacs-smart-closing-parenthesis nil
    ;; Select a scope to highlight delimiters. Possible values are `any',
    ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
    ;; emphasis the current one). (default 'all)
    dotspacemacs-highlight-delimiters 'all
-   ;; If non nil advises quit functions to keep server open when quitting.
+   ;; If non nil, advise quit functions to keep server open when quitting.
    ;; (default nil)
    dotspacemacs-persistent-server nil
    ;; List of search tool executable names. Spacemacs uses the first installed
@@ -290,6 +337,11 @@ in `dotspacemacs/user-config'."
 This function is called at the very end of Spacemacs initialization after
 layers configuration. You are free to put any user code."
 
+  (spacemacs|define-custom-layout "@Mail"
+    :binding "m"
+    :body
+      (call-interactively 'mu4e))
+
   (beacon-mode 1)
 
   (setq ns-use-srgb-colorspace nil)
@@ -333,7 +385,7 @@ layers configuration. You are free to put any user code."
         mu4e-attachment-dir "~/Downloads"
         mu4e-view-show-addresses t
         mu4e-view-show-images t
-        mu4e-view-prefer-html t
+        mu4e-view-prefer-html nil
         ;; mu4e-html2text-command 'mu4e-shr2text
         mu4e-html2text-command "w3m -dump -T text/html"
         w3m-command "/usr/local/bin/w3m"

tmux/plugins/tpm

@@ -1 +0,0 @@
-Subproject commit 527d12321108d52cc5b53cd251f2a058fd07bf0e